参考文献

[1] 粟梅 ,张太乐 ,熊灿娟 ,刘小亮 ,高颖.基于OBE 的《工程力学》课程考核方式改革 [J]. 山东化工,2020,49(04):207-208.

[2] 侯红玲,任志贵,何亚银,赵永强.基于 OBE 理念 反 向 设 计 教 学 过 程 研 究 [J]. 大 学 教育,2019(10):57-59.

[3] 苗莉.互联网+3D 打印技术在机械类应用型人 才 培 养 中 的 实 践 探 究 [J]. 甘 肃 科技,2019,35(18):69-70.

[4]       Pietrabissa       Andrea,Marconi Stefania,Negrello   Erika,Mauri   Valeria,Peri Andrea,Pugliese       Luigi,Marone       Enrico Maria,Auricchio Ferdinando. An overview on 3D printing for abdominal surgery. [J]. Surgical endoscopy,2020,34(1).

[5] Zhong Nongping,Zhao Xia. 3D printing for clinical application in otorhinolaryngology.[J]. European archives of oto-rhino-laryngology  :

official journal of the European Federation of Oto-Rhino-Laryngological  Societies  (EUFOS)  : affiliated  with  the  German  Society  for Oto-Rhino-Laryngology   -   Head   and   Neck Surgery,2017,274(12).

[6]    Huri    Emre,Mourad    Sherif,Bhide Alka,Digesu Giuseppe Alessandro. 3D modeling and 3D printing in functional urology: the future perspective. [J].  International  urogynecology journal,2020(prepublish).

[7] Kamio Takashi,Hayashi Kamichika,Onda Takeshi,Takaki                Takashi,Shibahara Takahiko,Yakushiji  Takashi,Shibui  Takeo,Kato Hiroshi. Utilizing a low-cost desktop 3D printer to develop a "one-stop 3D printing lab" for oral and   maxillofacial   surgery   and   dentistry fields.[J]. 3D printing in medicine,2018,4(1).

[8]       MA       GuoWei,WANG       Li,JU Yang.State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction[J].Science China(Technological Sciences),2018,61(04):475-495.

[9] S. El-Sayegh,L. Romdhane,S. Manjikian.

A critical review of 3D printing in construction: benefits, challenges, and risks[J]. Archives of Civil and Mechanical Engineering,2020,20(2).

[10]  Li-feng  Fan,Li-juan  Wang,Guo-wei Ma,Peng-fei    Li,Ming-jie    Xia.    Enhanced compressive   performance   of   concrete   via 3D-printing   reinforcement[J].   Journal   of Zhejiang University-SCIENCE A,2019,20(9).

[11] WANG Lei,LIU Jing.Compatible hybrid 3D printing of metal and nonmetal inks for direct manufacture of end functional devices[J].Science China(Technological

Sciences),2014,57(11):2089-2095.

[12] Xin Wang,Xiaoyong Tian,Qin Lian,Dichen Li. Fiber Traction Printing: A 3D Printing Method of Continuous Fiber Reinforced Metal Matrix Composite[J].  Chinese  Journal  of  Mechanical Engineering,2020,33(11).

[13]  Jabran  Saroia,Yanen  Wang,Qinghua Wei,Mingju Lei,Xinpei Li,Ying Guo,Kun Zhang. A review on 3D printed matrix polymer composites: its potential and future challenges[J]. The International Journal of Advanced Manufacturing Technology,2020,106(5).

[14] 张丹丹. 山东大学启动 17 个微专业建设项

目

[Z].https://www.view.sdu.edu.cn/info/1003/1339

23.htm, 2020.04.08.

[15] F. Lin, L. Zhang, T. Zhang, J. Wang, R. Zhang,   Innovative   Education   in   Additive Manufacturing in China, in: 23rd Annu. Int. Solid Free.  Fabr.  Symp.,  Laboratory  for  Freeform Fabrication and University of Texas at Austin, Austin, USA, 2012: pp. 14 –44.

http://www.scopus.com/inward/record.url?eid=2- s2.0-84898487345&partnerID=40&md5=669226e0bb46 42ee5e7d2d578c02fb63.

[16] Ghotbi, E. (2017, June), Applying 3D Printing to Enhance Learning in Undergraduate Kinematic and Dynamic of Machinery Course Paper presented at 2017 ASEE Annual Conference & Exposition,           Columbus,           Ohio. https://peer.asee.org/27600

[17] Simon Ford,Tim Minshall. Invited review article: Where and how 3D printing is used in teaching     and     education[J].     Additive Manufacturing,2019,25.

[18] Stefan Junk,Rebecca Matt. New Approach to Introduction of 3D Digital Technologies in Design Education[J]. Procedia CIRP,2015,36.

[19] Payne B R. Using 3D printers in a computer graphics survey course[J]. Journal of Computing Sciences in Colleges, 2015, 31(2): 244-251.

[20] C.P. de Sampaio, R.M. de O. Spinosa, D.Y. Tsukahara, J.C. da Silva, S.L.S. Borghi, F. Rostirolla, J.Vicentin, 3D printing in graphic design education: Educational experiences using Fused Deposition Modeling (FDM) in a Brazilian

university, in: Proc. 6th Int. Conf. Adv. Res. Virtual Rapid Prototyp., Leiria, Portugal, 2013: pp. 25 –30. doi: 10.1201/b15961-7.

[21] A.M. Paudel, D.K. Kalla, Direct Digital Manufacturing Course into Mechanical Engineering Technology Curriculum, in: ASEE Annu. Conf. Expo., ASEE,     New     Orleans,     USA,     2016. doi:10.18260/p.26848.

[22]     Levin     Dmitry,Mackensen     G Burkhard,Reisman   Mark,McCabe   James   M,Dvir Danny,Ripley Beth. 3D Printing Applications for Transcatheter  Aortic  Valve  Replacement.[J]. Current cardiology reports,2020,22(4).

[23] Megumi Inoue, Tristan Freel, Anthony Van  Avermaete,  et  al.  Color  Enhancement Strategies for 3D Printing of X-ray Computed Tomography  Bone  Data  for  Advanced  Anatomy Teaching  Models[J].  Applied  Sciences,  2020, 10(5).

[24] Mcmenamin P G, Quayle M R, Mchenry C R, et al. The production of anatomical teaching resources using three ‐dimensional (3D) printing technology[J]. Anatomical Sciences Education, 2014, 7(6): 479-486.

[25] Penny M R, Cao Z J, Patel B, et al. Three-Dimensional  Printing  of  a  Scalable Molecular Model and Orbital Kit for Organic Chemistry Teaching and Learning[J]. Journal of Chemical Education, 2017, 94(9): 1265-1271.

[26] Hall S, Grant G D, Arora D, et al. A pilot study assessing the value of 3D printed molecular modelling tools for pharmacy student education[J]. Currents in Pharmacy Teaching and Learning, 2017, 9(4): 723-728.

[27] Go J, Hart A J. A framework for teaching the fundamentals of additive manufacturing and enabling    rapid    innovation[J].    Additive manufacturing, 2016: 76-87.

[28] Gatto A, Bassoli E, Denti L, et al. Multi-disciplinary  approach  in  engineering education: learning with additive manufacturing

and reverse engineering[J]. Rapid Prototyping Journal, 2015, 21(5): 598-603.

[29] Armesto L, Fuentesdura P, Perry D, et al. Low-cost Printable Robots in Education[J]. Journal of Intelligent and Robotic Systems, 2016, 81(1): 5-24.